Often asked: Where should you aim a fire extinguishers stream when extinguishing a fire?

Which area of a fire should you aim the nozzle of a fire extinguisher?

Using the correct type of extinguisher for the fire, use the four-step PASS technique. Pull: Pull the pin, this will break the tamper seal. Aim: Aim low, pointing the nozzle or hose at the base of the fire.

Why do you aim at the base of a fire?

You should aim the nozzle, hose or horn (on a CO2) at the base of any fire because this is where the fuel is, and this is the part you need to extinguish to stop the fire from continuing. If you simply aim at the flames you will not stop the fire permanently and your extinguisher will be empty before the fire is out.

What is the best defense against fires?

Fire Extinguishers: Your First Line of Defense Against Fires.

When should you not use a fire extinguisher?


  • Ignoring the instructions written of the fire extinguisher.
  • Using the wrong type of extinguisher for the wrong class of fire.
  • Rushing into a fire unprepared:
  • Trying to put out a big fire using several extinguishers one at a time.
  • Aiming the extinguisher directly at a burning liquid while you are close to it.
You might be interested:  Readers ask: Brakes grinding when stopping?

Can plug sockets catch fire?

Most electrical fires are caused by faulty electrical plug sockets and dated appliances that have been around for a while. Don’t use an appliance with a worn cord which could send heat onto combustible surfaces like floors, curtains, and rugs that can start a fire.

Where are you most likely to find a fire blanket?

They are commonly installed in kitchens where they can be used to extinguish fires caused by fat, oil or grease however they are becoming increasingly popular in all kinds of settings where small fires may occur such as caravans, schools, business places, factories and workshops.

What does the A stand for in pass?

Discharge the extinguisher within its effective range using the P.A.S.S. technique (pull, aim, squeeze, sweep).

What should you not do in case of a fire?

5 things you should never do in a fire

  • Breaking windows.
  • Opening hot doors.
  • Returning for your belongings.
  • Hiding.
  • Do not use lifts.
  • Use the appropriate fire extinguisher.
  • Call the emergency services.
  • Escape.

What does ABC mean in fire extinguisher?

Dry Chemical Extinguishers come in a variety of types. “DC” short for “dry chem” • “ABC” indicating that they are designed to extinguish class A,B,and C fires, or • “BC” indicating that they are designed to extinguish class B and C fires. “ABCfire extinguishers are filled with a fine yellow powder.

What is your first defense against fire?

Fire Extinguishers: Your First Defense Against Fire.

Can you use fire extinguisher on electrical fire?

Electrical fires are very common in both homes and industrial settings. If possible, you should try to extinguish the flames using a carbon dioxide or dry powder fire extinguisher. If and when the power source is disconnected, the fire can become a different class of fire, typically Class A.

You might be interested:  FAQ: When can you determine the sex of a baby?

Who is most at risk during a fire?

Risk by age:

Adults ages 85 or older had the highest risk of fire death. had a greater relative risk of fire injury than the general population. had an elevated risk of both fire death and injury when compared to older children (ages 5 to 14).

Why can’t you use a fire extinguisher on a person?

These extinguishers are meant to control electrical fires and those involving flammable liquids. It releases a blanket of CO2 (carbon dioxide) gas that deprives the fire of air, essentially suffocating it. Its health effects include: Causing frostbite to occur on exposed parts of the body *

Leave a Comment

Your email address will not be published. Required fields are marked *